Glass White

By admin  



Glass+White

How to remove the sticker on the window glass   by Globalbattery

Surface cleaning, the car will be related to many materials and different surface coating inside and outside decoration, and so, therefore, during the cleaning should note that the more the following matters:

Pay attention to weather. The best the outer surface of the car wash cleaning indoors or in shade, do not allow cleaning in direct sunlight because the sun dried up the water droplets of the body will leave spots, affecting appearance. Does not allow rinsed in cold, then it clean is not clean can cause water droplets to ice in the body surface, causing the shell coating crack.

Attention to sealing. Before cleaning should be all the doors, windows, hood and trunk lids, vents, air population tightly closed, to seal the engine electrical system to prevent the cleaning water, causing a short circuit channeling electricity and corrosion. Cleaning lorries laden fear of wet, should be guarded or not cleaning the upper part.

Note the more stagnant water. Site cleaning without drying equipment, the best car parked in the open space with a small slope or side of the road, so that after cleaning the cleaning agent and hydro own shed to prevent water contamination or corrosion.

Note the brake. Car wash the inside of the wheel Yi, to prevent water, causing the brake does not. Found that water can be running at low speed, depress the brake pedal repeatedly, causing friction, generate heat so that it is self-drying.

Attention to water pressure. Manual cleaning, use the hose. The water pressure should be appropriate, the water pressure is too high will cause the car the appearance of dirt durum scratch the paint.

Note the more dip splash. Upholstery cleaning accidentally dip splash dirt, taking advantage of the dirt is dry, as soon as possible cleaning. If he has dried up. Use of water or cleaning agent, soft brush scrub slowly, and not allowed to scrape hard tool.

Note solvent. Does not allow the car wash the outer surface of alkali, kerosene, gasoline, mineral oil, and acid solvent. Rubber parts available industrial glycerol wipe away the gray sediments are not washed.

Note rust. Rust, chrome parts cleaning if available white J-} powder or tooth powder to sprinkle in flannel stained with ammonia or turpentine to clean, finished with the mop and then coated with a rust-proof clear lacquer.

How to remove the sticker on the window glass

Many owners the vehicle front windshield because the paste vehicle inspection sticker, a few years have been a little bit and block your vision, but because the car glass attached to solar film, but nor sharp plastic shovel to eradicate. The new logo can not fail to paste. Is there a more convenient way to change the big painted face of the windscreen?

It is recommended that the chemical clearance method and physical clearance method are two ways.

Chemical clearance method:

Remove the sign posted on the front windshield, you can use hot towel apply a standard wet the car so its wet, some flag stickers can easily tear. Encountered in a long time, highly-adhesive signs stickers, front windshield stickers Solar Films, you can use special cleaning fluid to remove cleaning agents such as asphalt. Without detergent, soaked with soap and water or detergent water will also completely cleared.

If the front windshield stickers have solar film, you can repeatedly wipe with a towel dipped in a small amount of alcohol at the logo, but should never be sprayed directly on the glass, otherwise it will damage the car membrane. The front windshield, whether affixed solar film, do not use blades and other sharp instruments to remove the sign posted, otherwise it will scratch glass or solar film, and various bank cards, membership cards, phone cards are a good tool.

Physical clearance method

Very simple, is used to a salon hair dryer. If conditions permit, then the power is diverted to the outdoor long-term flapper plug in hair dryer, in signs posted around the back and forth with hot air heating, a moment, you can easily various flags stickers torn off.

Static stickers or the sucker paste.

Static stickers Price is not expensive, just posted slightly larger than the flag, owners can sign will be posted first on the electrostatic posted above, then the electrostatic stickers affixed to the front windshield, so posted up a very solid removal is not will be glued to the front windshield. Static stickers are one-time use, while the sucker stickers can be used repeatedly. The sucker paste similar to the ultra-thin frames, placed which will be signs posted, and then use the suction cup to affix the suction cup to be fixed on the front windshield. Both tools are easy to install and easy to take, static stickers can not recycle, but the relative suction cups can be recycled stickers, and more beautiful.

About the Author

Battery Supplier provide high quality HP laptop batteries and IBM laptop batteries


Dell 312-0186 Battery, Dell Studio 1745 Battery, HP HSTNN-CB1A Battery from www.sales-battery.com


Solar Panel Charger for Laptop, DM 500-S Satellite Receiver, ACER Aspire 5732Z Battery from www.all-batteries.co.uk



FRANCE 24 Environment – A glass of red, white or green?